Tenant support

Your home.
Simple answers.

Helpful advice for everyday household problems, simple ways to keep your home comfortable, and clear guidance when something needs urgent attention.

Many everyday issues can be resolved with a few simple checks. This guide will help you know what to try safely and when to get in touch.

01 / Small daily habits

Less moisture.
More fresh air.

Cooking, showering and drying washing all release moisture. A few everyday habits can help reduce condensation on cold windows and walls.

01 — EXTRACTOR FANS

Make the most of your fans.

Please use the extractor when cooking, bathing or showering, and allow it to finish running afterwards. Continuous fans should stay on, with their isolator switched on. Keeping kitchen and bathroom doors closed helps contain steam while the fan removes it.

02 — WINDOWS & VENTS

Give moisture a way out.

Open windows briefly each day and after steamy activities when safe. Keep trickle vents—the small vents in window frames—open, and leave air vents clear. Ventilation is still needed in cooler weather.

03 — DRYING WASHING

Dry washing away from radiators.

Dry outside where possible. Indoors, use an airer in a ventilated room with the door closed and a window open or extractor running. Keeping wet clothes off radiators helps reduce moisture and allows heat to circulate.

04 — NIGHT-VENT SETTINGS

A small gap can help.

If fitted, use your window’s night-vent position as shown at handover when it is safe to do so. It leaves the window slightly open; do not assume it is as secure as fully closed and locked. Close and lock accessible windows before bed or going out.

05 — EVERYDAY MOISTURE

Catch it at the source.

Put lids on pans and use the kitchen extractor. Wipe condensation from windows and sills before it soaks into surfaces. Leave a small gap behind furniture so air can circulate, especially against outside walls.

06 — HEATING

Keep warmth consistent.

Use the heating controls to maintain a comfortable, reasonably steady temperature when you can. Keep radiators clear of furniture and curtains. If heating costs are a struggle, Nest offers free advice.

Please let us know about mould, leaks or a faulty fan. Damp can also come from building defects. A photo and a few details about where and when it appeared will help us assess it. Please report it promptly and leave affected surfaces unpainted so we can investigate. We will still arrange any necessary repairs.

Further guidance: Rent Smart Wales: condensation, damp and mould · Anglesey Council: ventilation and washing · Welsh Government: drying washing · Police advice on window security

02 / Heating & hot water

Start with the
simple checks.

Most of our boilers are Vaillant or Ideal. Please check the model label and user guide first, as the filling arrangement can vary even within the same brand.

Heating not coming on?

  1. Check the thermostat. Is it set above the room temperature? Replace user-replaceable batteries if the display shows they are low.
  2. Check the timer and mode. Make sure heating is scheduled to be on and the controls are not in summer or holiday mode.
  3. Check radiator settings. Turn the normal numbered valve up in the room you want to heat. Do not adjust covered balancing valves.
  4. Check the display. Note any fault code and the pressure reading. If you use a prepayment meter, check the credit.

Boiler pressure looks low?

  1. Read the user guide first. Only top up if it describes a task you can safely carry out and your filling arrangement matches.
  2. Turn the heating off and let it cool. Check the cold pressure against the range stated for your model.
  3. Follow the matching instructions. Open only the identified filling controls slowly, watching the gauge. Stop at the manual’s recommended pressure.
  4. Close the filling controls fully. Finish any remaining steps in the user guide before restarting.

Watch the guide that matches your boiler.

These manufacturer videos demonstrate particular filling arrangements. Please check that both the model and controls match yours. If they look different, leave the valves as they are. Your property’s user guide may help, or we can point you towards the right instructions.

Videos connect to YouTube only when you choose to load them. If a video cannot play here, use “Watch on YouTube”.

When to ask for help: please stop topping up and contact us if pressure drops suddenly or repeatedly, will not rise during filling, becomes too high, or you see a leak. Close the filling controls if safe. Never remove the boiler casing, adjust gas fittings or repeatedly reset a fault. If you are unsure or unable to carry out a check, contact us.

Manufacturer support: Vaillant pressure advice · Ideal fault-code guidance

03 / Everyday questions

A quick check may be all it needs.

Choose the question that best matches the issue. For appliance checks, follow the user guide for the model in your home.

Why is my extractor fan not running?

Try its usual wall switch or pull cord. Some fans start with the light, after a short delay or when humidity rises. Leaving the isolator on allows the fan to work as designed.

If it still does not run, please let us know. Leave covers and wiring in place so we can arrange a safe repair.

Why is one radiator still cold?

Check that the heating is on, then turn up the radiator’s normal numbered valve and allow time for it to warm. Please leave covered balancing valves as they are.

A cold patch at the top may indicate trapped air. Only bleed a radiator if your handover guide explains how and you feel confident; switch the heating off, let it cool and recheck boiler pressure afterwards. A cold patch at the bottom may need an engineer. If it remains cold, we can help.

Ideal Heating: understanding cold radiators

My washing machine will not start

Check that the door is fully closed, with no clothing caught in the seal, and that the drum is not overloaded. Check for a child-lock symbol and follow your model’s instructions for selecting and starting a programme.

Please avoid forcing a locked door. If it remains locked after the programme finishes, or shows a fault code, check the user guide before trying anything further. Leave pump filters and hoses alone unless the manual provides a safe procedure you are comfortable following.

Bosch: door and loading checks

My dishwasher is not cleaning well

Scrape leftover food into the bin before loading. Check the removable filter for trapped food and clean it as shown in your model’s user guide. Let the appliance cool and switch it off before cleaning; take care around sharp debris and refit the filter securely.

Use dishwasher detergent rather than washing-up liquid. If there is standing water or a continuing fault, please report it rather than dismantling the pump or pipework.

Bosch: caring for dishwasher filters

My tumble dryer is taking longer than usual

Once the programme has finished and the dryer has cooled, clean lint from the accessible filter and around the door. Do this after each use, following the manual. Avoid overloading the drum, keep ventilation openings clear, and check the user guide for any further routine cleaning.

Please use the dryer while you are at home and awake, and allow its cooling cycle to finish. If it overheats or smells of burning, stop using it and follow the electrical safety advice.

Electrical Safety First: tumble dryer care

How can I prevent blocked sinks and toilets?

Clear visible hair and food from accessible plugholes or removable strainers and put it in the bin. Let cooking fat cool and dispose of it with household waste rather than pouring it down the sink. Only human waste and toilet paper should be flushed; please bin wipes and sanitary products.

For a slow drain, try cleaning the accessible strainer first. Please avoid corrosive drain chemicals or taking pipes apart. Let us know if a blockage persists; an overflowing toilet or sewage backing up needs an urgent call.

Welsh Water: simple ways to prevent blockages

What should I check if the electricity goes off?

Look to see whether neighbours or street lights are also affected. For a wider power cut, call 105. If only your home is affected, check meter credit if applicable.

You may reset a clearly labelled trip switch once using your handover instructions, only if everything is dry and there is no gas smell, burning, damage or sparking. If it trips again, leave it off and call us. Never remove the consumer-unit cover.

National Grid: electrical safety advice

What does a beeping alarm mean?

A full smoke or carbon monoxide alarm needs immediate action: follow the emergency advice below. For an occasional chirp, check the alarm’s user instructions. Replace a battery only if the model allows it.

Please keep alarms connected and uncovered, and tell us promptly about a fault or a sealed-battery warning. Never remove an alarm or its battery just to silence it.

A useful habit: keep your appliance manuals and property handover guide together so they are easy to find when needed.

04 / When it is urgent

Act safely.
Get the right help.

In an emergency, do not wait for a reply to a message. Contact the appropriate emergency service first, then let ETHOS know when safe.

Fire or immediate danger

999 ↗

Get out, stay out and call the emergency services. Do not delay to collect belongings or turn off supplies. If you cannot escape, call 999 and follow the operator’s advice.

Official fire safety guidance

Gas smell or CO alarm

0800 111 999 ↗

Get everyone into fresh air and call the National Gas Emergency Service from outside. Do not use flames, smoke, or turn electrical switches on or off.

If safe without delaying your exit, open doors and windows and turn off gas at the meter’s emergency control valve. Do not enter a cellar or basement to reach it. Stay outside until advised it is safe; do not turn the gas back on yourself.

Suspected carbon monoxide exposure: get medical advice via 111. For severe symptoms such as breathing difficulty, confusion, collapse or chest pain, call 999.

Wales & West Utilities · NHS carbon monoxide advice

Water leak or burst pipe

Turn off the internal stop tap if safely accessible. For a conventional tap, turn gently clockwise; for a lever, follow its label or your handover instructions. Do not force it.

Keep away from wet electrics and bulging ceilings. Switch electricity off at the main switch only if the route and switch are dry and safe, and there is no gas smell. Never enter standing water to reach it.

Call ETHOS promptly on 07448 320530. For a wider supply problem, check Welsh Water’s service information.

Welsh Water leak advice

Electrical danger or power cut

105 for power cuts ↗

For fire or immediate danger, call 999. Stay clear of damaged cables, sparking equipment and anything electrical that is wet.

Turn off the consumer unit’s main switch only if it is safe and dry to reach and use, and there is no gas smell. Do not touch meters, service fuses or exposed wiring.

Call 105 for a network power cut or damaged network equipment. For an urgent fault inside your home, call ETHOS on 07448 320530.

National Grid safety advice

05 / Still need help?

Need a hand?
We’re here to help.

If an issue continues, or you are unsure about a check, please get in touch. We are happy to help. These checks are optional, and you can report a repair at any time.

For non-urgent repairs and questions:
enquiries@ethospropertiesswltd.co.uk

Routine enquiries: Monday–Friday, 9am–5pm.
Urgent repairs, including out of hours: call 07448 320530. Do not rely on WhatsApp or email for an emergency.

Our landlord details

Clear information. Responsible letting.

Rent Smart Wales — Licensed Landlord

Rent Smart Wales

ETHOS Properties SW Ltd holds a landlord licence for letting and managing its own rental properties.

Landlord licence
#LR-98193-55481
Granted
20 November 2025
Expires
19 November 2030
Check the Rent Smart Wales register ↗
NRLA landlord member

NRLA landlord member

We are a member of the National Residential Landlords Association, with access to landlord guidance, resources and support.

About the NRLA ↗

This guide covers simple household checks and everyday care. It does not replace your occupation contract, the instructions for your property’s appliances, or our responsibilities for repairs and safety.